Bevel Edge Laminate Countertop Trim in Formica# 3465 Golden Mascarello - Laminate countertops, Kitchen countertops, Countertop makeover

Little Known Facts About 10 Kitchens With Unbelievable Laminate Countertops.

Drill a starter hole inside the design template marks. The bit ought to be larger than the blade to your jigsaw. Screw a 12 (you can utilize the exact same piece you used for a rip fence if it is broader than the sink) to the center of your future hole. This will support the cut away so that its weight won't break any laminate when reaching completion of your cut.

Insert the blade into your starter hole and begin cutting. Once again, constantly have the blade approximately complete speed prior to initiating the cut. You will discover that it is a little harder to manage a straight line with a jig saw but not to stress, the lip of the sink will cover any minor slips over your mark.

Post-formed counter top (the kind with the important backsplash and drip edge) is fast and easy to install-- as long as you do not need to cut it. Then it's awkward to manage, the backsplash needs a different cut, and the plastic laminate chips easily. Did you see this? use large fixed saws with 12"- or 14"- dia.

Few people have that type of devices, but you can get precise outcomes with a circular saw and a shop-built jig. The jig imitates the easy guide a great deal of individuals use to cut plywood, but it has a second (much shorter) leg that twists around the backsplash. I constructed my jig out of scrap 3/4" plywood and utilized some remaining 1/2"- thick crave the cleats that guide the saw.

How to Cut a Laminate – Formica Countertop – DIY House Tips

Examine This Report on Cutting a standard laminate countertop How do you do it

Then install the cleat on the short leg of the jig and trim that side of the jig also. Because the edge of the jig is now perfectly lined up with the saw's blade, you position this edge on the counter top right on the line where you wish to make your cut.

Before making the backsplash cut, I set the countertop on sawhorses so it rests on the backsplash. This lets me make a nearly horizontal cut instead of attempting to hold the saw vertically. (KEEP IN MIND: When cutting countertop, utilize a fine-toothed plywood cutting blade to reduce cracking in the plastic laminate.) When you've got the backsplash cut, set the countertop on sawhorses and cut the broad section.